Aosi Bang thread locking agent, plastic screws, anaerobic adhesive, plastic bearings, retaining plastic, green oil 
 Screw plastic screw locking agent anaerobic adhesive bearing plastic retaining plastic green oil 
 Aosi Bang thread locking sealant products are widely used, with a locking, sealing, corrosion resistance and so on, to replace spring pads, locking cotter pins and other mechanical means. 
 A220 small thread locking agent (solvent) 
 ◆ green / red / transparent, solvent evaporation curing. ◆ M6 assembled the following threads before assembly or fastening 
 A222 thread locking agent (low strength, thixotropic viscosity) 
 ◆ Suitable for most of the metal surface, easy to disassemble. 
 ◆ applied fastener thread M6 or less ideal, with some lubrication, and can accurately achieve locking strength. Pieces of locking seal. 
 A242 thread locking agent (in intensity) 
 ◆ General purpose, thixotropic viscosity. M6-M20 threads for locking and sealing. 
 ◆ removable thread locking agent. Has some lubrication, and can accurately achieve locking strength. 
 A243 thread locking agent (resistant to oil, in intensity) 
 ◆ Fast curing, can be used for inert surface, good oil content, easy to disassemble. Slightly sticky grease in the work surface to use. 
 ◆ The following can be used for M20 thread locking and sealing. 
 A262 thread locking agent (high intensity) 
 ◆ Suitable for most metal surfaces. M20 the following thread for locking and sealing. 
 ◆ thixotropic viscosity, chemical resistance. 
 ◆ permanent locking of the thread locking agent. Chemical environment in the poor conditions have excellent anti-rust and corrosion. 
 A271 thread locking agent (high strength, low viscosity) 
 ◆ The following thread for M36 permanent locking and sealing. ◆ removal tool to be opened by local heating. 
 A272 thread locking agent (high temperature, high strength) 
 ◆ High temperature up to 230 ℃. ◆ Double cylinder head can be used for locking the thread. 
 ◆ cleaning most surfaces, including fasteners can not fast-curing. 
 ◆ the following for M36 bolts, remove the heating tool is required apart. 
 A277 thread locking agent (high intensity) 
 ◆ High viscosity, excellent chemical resistance. ◆ The following thread for M36 permanent locking and sealing. 
 ◆ prevent rust and corrosion thread, demolition tools to open the required heating. 
 A290 thread locking agent (penetration type) 
 ◆ in strength, low viscosity, fast curing. 
 ◆ has been assembled for the M2-M12 thread locking and sealing. Also be used to weld and seal porous castings such as trachoma. 
 ◆ prevent rust and corrosion thread, demolition tools required local heating apart. 

 Aosi Bang retaining cylindrical parts with plastic to increase the gap, transition fit, press fit cylindrical non-threaded with pieces of the joint strength. Alternative interference, transition fit, reduce stress and deformation of the assembly. 
 A603 retaining plastic cylindrical part (press fit, allow oil) 
 ◆ High strength, sealing and retaining of cylindrical parts. ◆ radial fill the gap for the 0.13mm. 
 ◆ solid in 10 minutes early, to prevent fretting corrosion and metal with parts. 
 A609 retaining plastic cylindrical part (press fit, low viscosity) 
 ◆ High strength, for rigid metal parts. ◆ radial fill the gap for the 0.13mm. 
 ◆ easily with different metal parts. 
 A620 retaining cylindrical plastic parts (sliding tie, high temperature) 
 ◆ High viscosity, high strength, not flowing. ◆ Retention gap 0.3mm in diameter. 
 ◆ The temperature to 230 ℃. ◆ to prevent fretting and corrosion of metal. 
 A680 retaining cylindrical plastic parts (sliding with high intensity) 
 ◆ retaining sleeve, pulleys, gears, rotor. Repair holes and shafts with the parts, tolerance parts 
 ◆ radial clearance is filled with 0.25mm, the early cure in 10 minutes 
 Other information 
 For more detailed product technical data in English (TDS), use of technology, material safety data sheets (MSDS), Environmental Report (SGS), please contact your local sales representative or dealer Aosi Bang. 

 Contact: Miss Wang 
 Mobile: 
 QQ: 1 
 Phone: Fax: 

 Address: Bao'an District, Shenzhen City, Baoan Road, Xixiang Town, Shu Tsung Yuen Building, 8th Floor